Bearing Box Gaskets

Hyatt roller bearing box gaskets are cut from 1/32" thick Non-Asbestos Gasket Material from Teadit. The material is a high quality, general service sheet, manufactured with synthetic fibers (Aramid) and a nitrile rubber (NBR) binder. It is recommended for use in sealing oils, solvents, fuels and non-aggressive solutions, under continuous service conditions up to 460 degrees F and intermittent service conditions up to 750 degrees F.

Dimensions are 11-1/8" O.D. x 8-1/2" I.D. Six 9/16" holes are punched at 60 degree intervals on a 9-5/8" concentric circle to accomodate the box cover bolts.

If you need other box gaskets, send us a drawing and we can cut them to your specifications from the same material.